×

Industry

tools

Customer orientation

Customer orientation is the key value for GreenOil innovation. Simplicity, effectiveness and cost effective filter solutions all combined in one unit. The GreenOil patended solutions set new standards to deep filtration of oils. GreenOil technology contributes to you and your green profile.

money-bag

Protected investment

The large range of products secures a solution for any application using hydraulic, transmission, diesel or lubrication oil. Your investment are protected by payback periods below 12 months. Operational costs are extremely low and first of all your machinery are protected from break downs.

droplet

Extended lifetime

Cost effective operation means low power consumption and reduced maintenance cost and time for the engineers and service personal. The use of GreenOil filters extend the lifetime of any oil. Every liter of oil reused saves the environment for unnecessary Co2 emissions.

Choose your application

Windturbine – Gear oil

WP1-PX-30-400_08.2017
Particle filtration for pressurized and unpressurized. Ideal for engine lubrication oil filtration up to 2500 kW.
data-sheet-pdf
WP1-BX-30-400_08.2017
Combined particle and water separation for non-pressurized systems.
data-sheet-pdf

Powerplant engine – Lubrication oil

WP1-PX-30-400_08.2017
Particle filtration for pressurized and unpressurized. Ideal for engine lubrication oil filtration up to 2500 kW.
data-sheet-pdf
WP1-PX-400-1000_08.2017
Particle filtration for pressurized and unpressurized. Ideal for engine lubrication oil filtration up to 7000 kW.
data-sheet-pdf

Fuel oil - Diesel and Gas oil

WP1-C1-125-1000_08.2017
Diesel and Marine Gas Oil filtration with combined particle and water separation.
data-sheet-pdf

Gear and Hydraulic power packs – Gear and Hydraulic oil

WP1-BX-30-400_08.2017
Combined particle and water separation for non-pressurized systems.
data-sheet-pdf
WP1-PX-30-400_08.2017
Particle filtration for pressurized and unpressurized. Ideal for engine lubrication oil filtration up to 2500 kW.
data-sheet-pdf
WP2-X3-40-100_01.2018
Combined particle and water separation for pressurized systems. Ideal for thrusters, sterntube and propeller applications including EAL bio oils.
data-sheet-pdf

Mobile solution

WP1-PX-100-400 Mobile_08.2017
Mobile particle filtration for maintenance and emergency use.
data-sheet-pdf
WP1-CX1-XX Mobile_02.2018
Mobile particle and water removal for maintenance and emergency use. 10 liters of water removal per day.
data-sheet-pdf
WP2-X3-40-100 Mobile_01.2018
Mobile combined particle and water separation for pressurized systems. Ideal for thrusters, sterntube and propeller applications including EAL bio oils.
data-sheet-pdf

Filter elements and oil preheater

Data Sheet GreenOil range of filter elements_08.2017
GreenOil range of filter elements.
data-sheet-pdf
Data Sheet Oil Preheater_08.2017
Eletrical preheater to increase temperature in cold areas.
data-sheet-pdf

Application example

GreenOil installed on Wind turbines

The gearbox is one of the most essential and important components in a Wind turbine. A gearbox is heavily loaded and will be exposed to wear and tear. If the transmission is worn or damaged, it will usually require an overhaul, or at worst, a complete new gearbox.

The GreenOil off-line filter solution is produced with that in mind. Over a period of 4 months a GreenOil filter unit was installed on the gearbox in a Siemens Bonus 500 wind turbine. The results showed that the oil quality was improved and kept at conditions better than new oil, hence aiding in keeping the gearbox in good condition, and by that enhancing the business case and life time of the wind turbine.

 

You can read the full case story and more here...

windmill

GreenOil offer a unique filtration system for Wind turbines